X18 Drag Bike

[Supercharged]

So last night we unhooked the x18 and x6 wiring. Took the engine out of the x6 and x18 and set them up on the work table. It took about 2 hours to get the bbk out of the x6 head and into the x18 head and start her up. I have to buy a rotator plate for the 26mm mikuni carb i got, im currently using the stocker which i thought i might add it leaves you with almost no tuning.

I have the front and back tires on the way, i may get it today considering yesterday i got the 28 tooth sprocket i ordered with a gasket kit. So today is going to be comprised of putting the x6 rims and tires on the x18, no brakes but who needs brakes when you got a clutch. You cant tune without being able to move so here in a few hours im gonna start the rest of the project. I have no pictures or video, my brother probobly got it stolen by the people he hangs with.

I am going to get some real paint and paint my plastics, im going to cut the bottom of my fairings which I was going to anyways cause im gonna drop a drag exhaust in there. I have to buy a seat and gas tank fairing, my front plastic has a chicken wire mod (better than the plastic), i also am going to go buy some blinkers, lights, and mirrors.

[Niusiic[latvia]]

So last night we unhooked the x18 and x6 wiring. Took the engine out of the x6 and x18 and set them up on the work table. It took about 2 hours to get the bbk out of the x6 head and into the x18 head and start her up. I have to buy a rotator plate for the 26mm mikuni carb i got, im currently using the stocker which i thought i might add it leaves you with almost no tuning.

I have the front and back tires on the way, i may get it today considering yesterday i got the 28 tooth sprocket i ordered with a gasket kit. So today is going to be comprised of putting the x6 rims and tires on the x18, no brakes but who needs brakes when you got a clutch. You cant tune without being able to move so here in a few hours im gonna start the rest of the project. I have no pictures or video, my brother probobly got it stolen by the people he hangs with.

I am going to get some real paint and paint my plastics, im going to cut the bottom of my fairings which I was going to anyways cause im gonna drop a drag exhaust in there. I have to buy a seat and gas tank fairing, my front plastic has a chicken wire mod (better than the plastic), i also am going to go buy some blinkers, lights, and mirrors.

sounds hard. good luck!

[Niusiic[latvia]]

sounds hard. good luck!

[Niusiic[latvia]]

crap. That was double post. Please delete this and 1st post!

[Supercharged]

yeah the hardest part was putting the engine back in, back breaking work trying to lift it and ram those motor mounts inside

[kidd1029***]

;21666']crap. That was double post. Please delete this and 1st post!

UH OH! You're violating your signature!!! HEY ITS A DOUBLE POSTER, GET HIM!!! bluelaugh

[Niusiic[latvia]]

yeah the hardest part was putting the engine back in, back breaking work trying to lift it and ram those motor mounts inside

and the wires. I hate wiresangry_red

[Niusiic[latvia]]

UH OH! You're violating your signature!!! HEY ITS A DOUBLE POSTER, GET HIM!!! bluelaugh

o, crap. lolbluelaughbluelaugh

[Supercharged]

im awesome and have only neccessary wire hooked up, wires to ground and thats it

no electric start for me, only real men kick the kick start

[Niusiic[latvia]]

im awesome and have only neccessary wire hooked up, wires to ground and thats it

no electric start for me, only real men kick the kick start

crap, I'm not man, I have auto and it has only electricbluelaugh

[Supercharged]

yes you are, you admit to it so ill give you the benefit of the doubt

[Niusiic[latvia]]

yes you are, you admit to it so ill give you the benefit of the doubt

lolmoon1

[Shooter]

no electric start for me, only real men kick the kick start

HUH?
I resent that remark!
I got e-start and my bike's gonna kick! ........ PUN INTENDED!
I'm not even gonna get into looks!
And yeah.......... I guess I'm not a "real man" cause I don't wanna go jumpin' apeshcnit all over my bike, but then again, maybe I'm not humanmoon1
Bring on da Borgs!bluelaugh

[Niusiic[latvia]]

HUH?
I resent that remark!
I got e-start and my bike's gonna kick! ........ PUN INTENDED!
I'm not even gonna get into looks!
And yeah.......... I guess I'm not a "real man" cause I don't wanna go jumpin' apeshcit all over my bike, but then again, maybe I'm not humanmoon1
Bring on da Borgs!bluelaugh

lolbluelaugh

[Supercharged]

HUH?
I resent that remark!
I got e-start and my bike's gonna kick! ........ PUN INTENDED!
I'm not even gonna get into looks!
And yeah.......... I guess I'm not a "real man" cause I don't wanna go jumpin' apeshcnit all over my bike, but then again, maybe I'm not humanmoon1
Bring on da Borgs!bluelaugh

hahaha RESENTMENT....its okay shooter your show bike can have a kick starterwave_finger

[Blitz$M.Inc.$]

its, 'real men kick it'
what bore is this anyway, a 114?

[Supercharged]

yea, its the high compression piston with the sleeve

[Supercharged]

after eating a whole lime, eating a frosty, and a whole ass load of kicking have came to the conclusion i need a rotator plate A.S.A.P.

the stock carb simply cannot keep up with the fuel demand, it starts and goes WOT after you let out of it or give it less gas it dies. After we tuned and kicked all last night and a little bit ago I know im gonna haul ass with my mikuni, but hey whose in a rush here...me but i need a rotator plate, 52mm stock gasket kit, and tires that are on there way and i have to take the old ones off and put on the new.

[Ghost Rider]

cant wait to see pics!!!

[Supercharged]

its not pretty...its plain stupid fast.

to be honest i could care less what it looks like

[Supercharged]

so here in a little bit imma take the x6 head and see if the 26 carb can go onto the x6 head, basically its more work, take out mounts, undo engine carefully to not kill gaskets, put the timing chain back on right and hook up throttle and clutch with the gas line hooked up it should be a go

hopefully the head is different from the x6 model

[Supercharged]

so heres some pictures of the progress, my brother got a brand new camera also so there awesome quality

[Supercharged]

pictures of the carb after these next 2 sets

[Supercharged]

some more

[Blitz$M.Inc.$]

looks like bert and ernies playtime with motors lol jk
is that a x6 motor in a 18 frame?

[Supercharged]

x6 valves, onto of the x18's manual trans, we had the x18 head but it wouldnt fit the 26mm

the project worked with a fuel line thats nice and snug against the frame and the airfilter will not fit inbetween the frame and carb....i have the invest in a throttle body screen or something of that sort

more pictures in a little bit

[mt250r86]

I had the same problem fitting my mikuni 26mm in my x18. I had to make an air filter. I took the stock one that came with the kit and cut about a quarter inch off the end. I then used a salsa cap (no really) and jb welded the cap to the end of the filter I cut. It looks good and works great. I scuffed and painted the cap before I jb'd it on. A quick tip though. Use the quick set jb weld or else you'll be waiting 12 hours or so. Works perfect and you can make it to fit your application.

[Supercharged]

progress in work

[Supercharged]

some more

[Supercharged]

and yes plenty more

[Supercharged]

more...

[Supercharged]

plenty more

[Supercharged]

and more...

[Supercharged]

thats it for now cowboy

[Supercharged]

I had the same problem fitting my mikuni 26mm in my x18. I had to make an air filter. I took the stock one that came with the kit and cut about a quarter inch off the end. I then used a salsa cap (no really) and jb welded the cap to the end of the filter I cut. It looks good and works great. I scuffed and painted the cap before I jb'd it on. A quick tip though. Use the quick set jb weld or else you'll be waiting 12 hours or so. Works perfect and you can make it to fit your application.

got some pictures?

i see what your saying but i was think throttle body screen, brainstorming never hurt anyonearmyguy

[X7rocks]

did the x6 valve head have bigger ports or just bigger valves?cuase for around 120 you can get the big valve head for that 114 of yours

[Supercharged]

last night was an hour of kicking without any spark, we fizzled with grounds and unhooking plugs, cutting wires and electric taping them togethor i found out the culprirt.

the x18's igniter died and wasnt giving any spart so i grabbed the x6's igniter and BAM blue hot hot spark. well after an ass load of kicking the cylinder was flooded, plain out just have to wait for evaporation and im going to take this spark plug out soon and clean balls and let that cylinder get nice fresh air

i need to get starting fluid, she popped and kicked and sounds like she wants to start.

any ideas, im open to anything

[Supercharged]

hey kenny, actually further inspection i see the x18 valves have less compression than the x6's in the first place, so it was actually a good thing to swap and for the big valve head its going to have to wait

i got to get her runnin, cut and make her plastics pretty, hook up my old battery, lights turn signals and of course the skeleton mod

[X7rocks]

try setting the carburator to 3 turns out then set the choke up and give a little bit of fuel.
if it keeps on doing that check your time once more to see if it might have skipped dureing the process of puting it together.

as for the valve head its good to have some more torgue numbers

[Supercharged]

did the x6 valve head have bigger ports or just bigger valves?cuase for around 120 you can get the big valve head for that 114 of yours

the x6 valves were almost flat across where the x18 has nice indents

[Supercharged]

its in time, put it back togethor and realized the timing was off, simple mistake that happens

i shouldnt have to tune the carb because it ran on my x6 tranny fine but maybe it could need a tune..ill try anything i suppose to get this sucker runnin

[X7rocks]

maybe the x6s werent as efficent as the x18s but if it runs it runs
valve head i mean for the indents on the valves

[Supercharged]

well now the x6 head is on which the 26mm was tuned to anyways but we have been ****ing with the tune its probobly outta whack

[Niusiic[latvia]]

mm. Nice. But when you do some thing with piston you should clean all around it!
P.S. lol. 6 ''and more'' bluelaughbluelaugh

[Supercharged]

;22026']mm. Nice. But when you do some thing with piston you should clean all around it!
P.S. lol. 6 ''and more'' bluelaughbluelaugh


says who about the piston?

and what PS about 6 and more?:confused::confused:

total confusion

[X7rocks]

ditto

[Niusiic[latvia]]

says who about the piston?

and what PS about 6 and more?:confused::confused:

total confusion

wtf? lol

[Supercharged]

re explain your post, in other words you didnt use before

[Niusiic[latvia]]

re explain your post, in other words you didnt use before

aww, I can't explain it!

[Supercharged]

here in a while imma go try and tune this sucker, the kicker is off center from it being loosened and tightened back then the kicks to continue got the splines outta whack ill put up pictures later

[Supercharged]

stupid shifter, here goes the untouchable tools

cresent wrech you *****

[Supercharged]

yes thats the zip tied brake caliper up top of the picture

[Blitz$M.Inc.$]

violent and sexy

[Supercharged]

so here in alittle bit imma take off the back tire and get a picture of this 28 tooth sprocket

i got my front and back tires today in SD scooter makeshift taped cardboard box

i love the smell of new rubber!!!!!

[Supercharged]

also i forgot to get picturs lastnight but we thought maybe we were 180 out so we changed the timing 4 times total...anyways she was trying to fire outta time without the magneto hooked up. when uninstalling the motor the first day we took the starter out and didnt hook back up the chain so thats why my bike wouldnt stay running.

so the day after tomorrow imma get a battery to kick this motor over, after 5 hours of kickin this bike im goin electric sorry SHOOTER!!!!!!!

anyways imma get some race gas with octane booster also with some starting fluid

[Supercharged]

heres some pictures

[Supercharged]

more after this

[Supercharged]

most of the photos were too big

[Supercharged]

tomorrow is a day of getting tires installed and filled with air, as a dumb project i gotta get the old beat up stretched stock chain off for the new DID

[Blitz$M.Inc.$]

i dont like those metal clips that are supposed to keep the sprockets bolts from backing out
blue locktite

[Supercharged]

werd blitz, its probobly one the last things im going to do

[Supercharged]

i should do it now that i have the tire off but i gotta take olds and put on news thats going to have to wait

[X7rocks]

i used green loctite....lol its never comeing out easily!

[Supercharged]

muahahaha well see the poiint is to be able to take it out without rippeing the head off the nut kenny

[Supercharged]

got those tires on today

[X7rocks]

how did you get the tires on there?

[Supercharged]

how did you get the tires on there?

lump sum of money just happen to come my way, i thought tires are too hard to do when you can get them done at a shopbanghead

actually its funny cause i went there and didnt have even enough money, by the time i came back from the house they were sitting waiting to be paid for

tire tools and muscle which i admit i dont have much of...im gonna be lazy and let someone else do itmoon1moon1

[Supercharged]

pictures soon, i wanna paint this frame and rims...i need to buy some AVS levers, also at that motorcycle shop they had shifter and rods like the x18 but better from crotch rockets...50 bucks i could make it work

[Supercharged]

3 more

[Supercharged]

thats it, i need to zero out this motor...i knew i shoulda marked that damn timing chainangry_red

[X7rocks]

i like how your photos are extremely clear even in a dark room like that
one heck of a stock pipe mod ill give you that :D

[Supercharged]

thanks kenny you like that, heres the pipe im looking at...props to rene

http://www.ooracing.com/store/index.php?act=viewCat&catId=saleItems

[X7rocks]

which one exactly? its like a catalog page

[Supercharged]

i want an underswept, http://www.ooracing.com/store/index.php?act=viewProd&productId=606

something like a certian companies drag pipe

[X7rocks]

oh dang i was just looking at that pipe
that one and the duel exhuast one :phat:

[Supercharged]

haha i know!

wonder if it will be in line with the swingarm and how far it will come out...i wonder

[Niusiic[latvia]]

aww. Looks good!

[Supercharged]

;22231']aww. Looks good!

thanks although it looks like crapbluelaugh

[Niusiic[latvia]]

thanks although it looks like crapbluelaugh

lol. I don't wanna be rude! bluelaugh

[Supercharged]

my ego will never be hurt, i know itll look badass one of these days coming soon

[Niusiic[latvia]]

my ego will never be hurt, i know itll look badass one of these days coming soon

rock manbluelaugh

[Supercharged]

holy crap look at this exhuast!

wonder if it will be the brake and kickstart

[rene13]

When installing the underslung exhaust, I have found that it is easier to bleed the brakes before you put it on cause you wil need the full range of motion. It doesn't interfere will the brake once on. The dual one I don't know.thinking_smilie but I don't think it would cuase those honda monkey's have kickstart.

[Supercharged]

.http://www.monkeybike.co.uk/acatalog/G_Craft_Low_Stainless_Muffler_for_Monkey.html

[rene13]

That is the Pipe I really wanted but G craft cost serious $$$$$$$

These pipes that come out of the side like that one and the underslung won't stick out no further than the tip of the Foot Peg.

That is a $415 exhaust. should be somewhat cheaper cause they are charging taxes on it for their country.

[Supercharged]

i will settle for the one thats 170 or 150

[X7rocks]

yoshimura is a kick in the nazz and wallet man

[Supercharged]

its either one of those or pbus

[Supercharged]

so i got have a pair of x6 forks, im thinking of starting this fork SEGA

dual brakes here i come, blitz did a great writeup but this is going to be a pain in the ass

[Supercharged]

WHOA!
wow these forks gotta go on hold, im thinking about modding an already made pair of forks...im starting to think more and more i want this to be track ready

why why why i just wanna go fast in low rpmsangry_red

[Blitz$M.Inc.$]

the hardest part was drilling the dual banjo bolt and shimming the calipers to spin with limited drag
but it works as advertised, bangin

[Supercharged]

so the timing was off a **** hair, the x18 beast is alive and running!!!

here goes to chain adjusting and tire adjusting


soon pictures of rolling around

[Supercharged]

in the process of tuning

stupid carb has the air fuel screw under the carb inpossible to get to without taking off the carb


here we are at 1030 for the 4th take off of the carb

btw outta tune i was cruisin low rpms in 4th

still got mad power with this 14/28

[Supercharged]

this is the last tune out of 6 take offs, shes got a wicked 1st gear...i wouldnt be surpised if i go down a tooth to change my drastic top end

[Supercharged]

okay, 1 more take off...its alittle lean, when you get to high rpms it bogs.

[Supercharged]

okay so we dropped the c-lip all the way down, weve tuned it but it bogs after high rpms

its okay in nuetral but when you ride and go threw it bogs, im starting to think its an intake leak cuase when we were seeing if the bike even had compression i seen bubbles coming from the top of the intake manifold...

any ideas

[Supercharged]

heres the custom exhuast we made

x18 flange, x6 header and spacer welded to the pipe as 1, into the flange and i have an adjustable muffler....

the muffler is summit racing 3inch with x18 fiberglass packing

[Supercharged]

more pictures

[X7rocks]

can you do that to my exhuast?

[Supercharged]

then some header paint

[Supercharged]

header paint:phat:

[X7rocks]

also take out the filter you have
that might be the cuase of the bogging ...i tryed something like taht and up top it bogged

[Supercharged]

no it was an intake leak...its a air fuel problem...and i admit i need a real airfilter

that was just for big june bugs

[X7rocks]

its just the way the carb is i dont think it will work uptop just give it a shot it might just work

[x18]

looks good how does it sound and if your going to do that dual front brake mod I have a new front brake rotor i can let go off for cheap

[Supercharged]

looks good how does it sound and if your going to do that dual front brake mod I have a new front brake rotor i can let go off for cheap


it sounds titties...it needs some more fiberglass which i saved for this very reason


stopped by the cops pulling out to test it, clearly by my black hands i wasnt lying...he was cool about itcowboy

[Supercharged]

can you do that to my exhuast?

i would but im gonna charge $$$$, im beat

ill let you how to go about it at best...dont mean to be a poope but its something you might as well do yyourselfthinking_smilie

[rene13]

are you planning on making a bracket so ou can put a hanger on the exhaust?

[Supercharged]

it does, the bottom fairiing is the canidate

maybe i should make these exhausts....but its a work out literally

[Supercharged]

i just got back from my first real ride...the bike is running great and isnt boggin or anything of the sort.

this muffler is pingin and poppin though...need more back pressure i have no low end but when i bang 3rd and WOT she pulls

[X7rocks]

has no lowend cuase the gears are to long 3rd is always a mid of torgue and hp unless you go out of wack with gears then its just there for the hell of it

[Supercharged]

i agree x7, yoo much top speed but thats what i want

cruise with traffic at low rpms

[The Nutty Professor]

Nice pipe. You're still running the 110 right? Noticed the small opening at the rear of the pipe. That would constipate my YX motor moon1

[Supercharged]

114 bbk, and thanks professor

[The Nutty Professor]

That's right the 114. Why do you think you need more back pressure?

[Niusiic[latvia]]

yea, I agree nutty p, nice pipe!
And maybe someone can tell how can I make one?Nutty-Rant

[X7rocks]

if anything you need the big valve head with 25 intake 22 exhuast that will make you feel more power then a good cam and i think hes set with the motor unless he wants a outer rotor kit to feel more of the hp the motor is capable of doing.

[Ghost Rider]

The bike is coming along great!!!..seeing that exhaust makes me wanna build one myself. banghead no welderbanghead Im just gonna have to fork up the money to get it made

[Supercharged]

so we took the muffler and cut the washer out....nutty was right about it choking up.

took 1 inch conduit and drilled 16 1/2 inch holes for a silencer....sounds ****ing awesome

[Supercharged]

the carb problem happened to be the laws of ram air...after 3rd and 4th she had mass air so she was lean.

after some thinking it over i thought clamp and bent sheet metal, lastnight i did a speed run and my buddy was actually surprised by something and that means alot to me when a chill dude told me it was stupid fast.speechless33

i just realized i no longer have a toy, this is a machine of enginuity. my older brother just had a hissy fit cause he couldnt ride it, i told him no one is riding and he didnt put no money or work into it...if someones gonna mess it up i want it to be mecrazy_smilie

[Supercharged]

first picture is the bent sheet metal deal...ghetto and no air filter but works for now

[Supercharged]

sprocket and some in general pictures

[Supercharged]

the exhuast bolts are going to be over hauled and fixed...aluminum is not very strongbluelaugh

[Supercharged]

stratch that 16 holes, i meant to put 12

[Niusiic[latvia]]

with no fairing and that pipe it looks sexy!bluelaugh

[Ghost Rider]

hey supercharged, would you be interested in making me a header pipe if i gave you enough exhaust heat wrap to cover yours and also paypal you some money

[Supercharged]

heres the outcome, helio coiled the exhuast bolts to grade 8...:phat:

this bike is turning out great

[ninja x1]

looks bad ass!!! so how dose it perform and sound with all the shit u did??

[Supercharged]

thats a funny question cause i was waiting for dude to come over and i thought he started up my bike to get me to come outside.

i went outside like you started my bike wow, but it just happened to be the guys harley next door

[Ghost Rider]

hey supercharged, would you be interested in making me a header pipe if i gave you enough exhaust heat wrap to cover yours and also paypal you some money

Are you interested??

[Supercharged]

i would cause x7 asked also but theres really no way it would work out for everyone, unless it was reasonable but in the end not my equitment

[Supercharged]

i bled my brakes so now i got all stopping power, my bike is running too rich..when im on a slant the gas pour and floods the cylinder

[Ghost Rider]

Sorry what exactly do you mean..haha the sentence was a little confusing to understand. So x7rocks also wants you to make him an exhaust, you would like to make an exhaust for me and him but it might be expensive, and you dont have the right equipment to make it. Did i get that right?

Just a rough guess....Around how much do you think it would cost for you to make just that header?

[Supercharged]

10 bucks for a whole thing on conduit, and yes the i dont have the EQ and its really a hassle not to have your bike here...its not just bent its plan thought out.

i should just sell my exhuast to an x18 rider

[rene13]

Do you have a hanger for the exhaust or what is hold up the exhaust where the weight of the can is at?

[Supercharged]

not to brag but its a genious ideacowboy

[x18]

good idea but what are you going to do about the farings

[Supercharged]

the last pictures are the can being painted last night

[Supercharged]

good idea but what are you going to do about the farings

cut them at the bottom, easy oil change and less work putting those damn things togethor....its going to be shweet i promisethinking_smilie

[Supercharged]

tomorrow or the day after im gonna have a buddy take some video

maybe i could do some runs by but for sure some clips short clips of that exhaust

you tell me how it soundsmoon1

[x18]

cut them at the bottom, easy oil change and less work putting those damn things togethor....its going to be shweet i promisethinking_smilie
i cut my farings but I left the mount still there i just cut 3 1/2 inches off of each side from the center but if you cut the mount it probably wont be so strong

[Supercharged]

i cut my farings but I left the mount still there i just cut 3 1/2 inches off of each side from the center but if you cut the mount it probably wont be so strong


thinking_smilie im trying to understand what your saying

[X7rocks]

bike is looking great man

[Supercharged]

bike is looking great man

i appreciate it much kenny my mancowboy

[x18]

thinking_smilie im trying to understand what your saying
what do you mean I couldnt of said it any simpler i just marked off 3-1/2 from the center and drew a straight line cut it there the lower mount is still there

[Supercharged]

im still lost, im sorry one of us is high

[x18]

im still lost, im sorry one of us is high
you must of been really high i even dumbed it down banghead haha well ill get a pic

[X7rocks]

lmfao

[Supercharged]

lmfao

i know im an ass but i think monkey didnt have his bananas todaymoon1

[x18]

here are the pics http://s436.photobucket.com/albums/qq82/x-18bike/

[x18]

wait a minute after looking at it more i realized you made another bracket for the exhaust i thought you were using the lower faring mount and i thought you said you were cutting that part of the faring out that might be whats causing the confusion crazy_smilie

[Ghost Rider]

10 bucks for a whole thing on conduit, and yes the i dont have the EQ and its really a hassle not to have your bike here...its not just bent its plan thought out.

i should just sell my exhuast to an x18 rider

If you can use your bike as a template that would work, the only difference is that im going to have the lower fairings still on so its going to need to be an "s" shape around the peg. Would you be interested if i paid for the conduit, sent you the exhaust heat wrap and also cover shipping?

[Supercharged]

like i said its nearly impossible without having your bike here....just the way it is, sorry 49 im probobly not your best bet

your in the US theres gotta be a welder in your townbanghead

[Blitz$M.Inc.$]

its like this, after all the crap to get it right and finished, the last thing we want to do is do it again
right?

[Supercharged]

its like this, after all the crap to get it right and finished, the last thing we want to do is do it again
right?


holy shit i couldnt have sed it better myselfspeechless33

[Blitz$M.Inc.$]

ya thats how i felt about the dual brake mod, im really glad i have it and all but i doubt i will make my other bike a dual just cause Nutty-Rant <--ha i got to use it :)

[Supercharged]

yea that was damn near dead on there blitz

[kidd1029***]

This has to be one of my favorite midbikes :phat: thumbsup2 rock2

[Supercharged]

thanks much kidd, i appreciate itcool_smilie

[Supercharged]

tomorrow me and dude are rollin to wholesale cycle for an airfilter, im going to order a pair of steering stabilizers asap

[Supercharged]

yea i bought a two brothers air filter.....fits perfect since its an offset opening

[stuntnx7]

you gonna leave it streetfighter or what

[Supercharged]

no its not safe to cruise not bolted down

[stuntnx7]

no its not safe to cruise not bolted down


what? u talkn to me dunno

[x18]

that really makes no sense supercharged dunno

[Supercharged]

dudes my seat doesnt bolt down, its just gas tank held in place by gas cap....and i stunted like that and did wheelies.....idiot me

[Supercharged]

yesterday when i bought that filter i bought a gold 420 chaincowboy

[Supercharged]

so heres just some more pictures, the last too would be the EPIC pictures but they got houses in the view:phat:

[Supercharged]

heres some all midbike pictures

[Supercharged]

next is probobly gonna be a crotch rocket steering stablizer a buddy of mine has extrathinking_smilie

[Blitz$M.Inc.$]

sweet, gonna do any painting? or wait till the fabbing is done

[x18]

i see you replaced your kickstand with a battery :phat: your exhaust looks good thumbsup2

[stuntnx7]

i see you replaced your kickstand with a battery :phat: your exhaust looks good thumbsup2



thats that new new right ther bluelaugh

[Supercharged]

sweet, gonna do any painting? or wait till the fabbing is done


yea im going to paint the plastics as soon as i order a gas tank and seat if i ever can get seperate parts, also my buddy has an 3:4 yamaha motorcycle with an awesome swingarm i might use...measure twice cut once

and yea the plastics are main priority so they will be painted if anything

[Supercharged]

i see you replaced your kickstand with a battery :phat: your exhaust looks good thumbsup2


gotta helio coil the threads for the kickstart cause its stripped out, ALUMINUM SUCKZ!!!

[Supercharged]

yea this is a top speed run in 5 pictures, on my bros camera it has a feature to take a picture right after another

[Supercharged]

gotta use your imagination

[Niusiic[latvia]]

mm, nice, your nakedbluelaugh bike looks fine. still need some pain jobs!

[Supercharged]

;23260']mm, nice, your nakedbluelaugh bike looks fine. still need some pain jobs!

thats not me, thats one of my other brotherscowboy


i know i know i should just start on the other plastics i do have

[Niusiic[latvia]]

thats not me, thats one of my other brotherscowboy


i know i know i should just start on the other plastics i do have

keep posting bro!

[Supercharged]

so today this steering stablizer is gonna get dropped off and were gonna check on mounting

[Supercharged]

so have the steering stablizer and that yamaha 3:4 bike...heres some pictures in about 5 minutes

[The Nutty Professor]

gotta helio coil the threads for the kickstart cause its stripped out, ALUMINUM SUCKZ!!!

No Chinese aluminum sucks rolleye0010

[Supercharged]

No Chinese aluminum sucks rolleye0010


amen, words of the wise

[Supercharged]

Heres the crotch rocket steering stablizer, and the swingarm from a yamaha ysr/nsr type of bike im guessing. I know its yamaha for sure.

Then there the back shock that looks worthy of a swapthinking_smilie

do things just keep getting better?

[Supercharged]

Just 8 pictures left

[Supercharged]

The last 4 for right now, now its time for some vicidon i just got my 4 wisdoms ripped out yesterday

[Supercharged]

going to check and see how this stablizer could mount

[Supercharged]

so today and yesterday i was rockin some 2nd gear wheelies...my drag exhuast mount bolt came off, so it was loose so i was taking off the header bolts and snap!!!

grade 8 broke?!?!

must have been a bad bolt, anyways i have helo coil stuck in my head with a grade 8.

were gonna have to take off the head and drill out the coils...buy aluminum rod and fill the drilled holes and tap them and make our own threads.......again

that yamaha bike has a direct fit swingarm....i guess this gives us and excuse to take her apart and mod her up.

that swing arm needs painted, the head needs new threads, the plastics need ordered, cut, and painted.

ill get pictures of the broke bolt in a little bit

[r32rider]

i just dont seee how you guys wheelie these bikes. i can ride a wheelie on any bike i set foot on but these bikes. i can get the front end up but cant find that balance area.

[Ghost Rider]

My bike is off balance too, whenever i try to ride no hands it starts to lean sideways. My old x18 was perfectly straight and i could ride no hands for as long as the road wasthumbsup2

[Supercharged]

for wondering mindsrolleye0010

[Supercharged]

irrelaventdunno

[r32rider]

its not that,i can ride with no hands till the bike stops. it just feels uncomfortable on one wheel.




My bike is off balance too, whenever i try to ride no hands it starts to lean sideways. My old x18 was perfectly straight and i could ride no hands for as long as the road wasthumbsup2

[Supercharged]

i just dont seee how you guys wheelie these bikes. i can ride a wheelie on any bike i set foot on but these bikes. i can get the front end up but cant find that balance area.

watch, ill get a picture and video in the near future...i hold my promises:phat:

[r32rider]

i have seen it many times, its just like first gear doent have enough speed to keep me up and second is impossible.

[ashar014]

i have seen it many times, its just like first gear doent have enough speed to keep me up and second is impossible.

you should get a YX 150, i installed mine and i cant help but wheelie, its almost scary how easy it is

[The Nutty Professor]

irrelaventdunno


Dude your bike is pissed you put those dice valve stem caps on it that's the problem without a doubt bluelaugh

[stuntnx7]

so today and yesterday i was rockin some 2nd gear wheelies...my drag exhuast mount bolt came off, so it was loose so i was taking off the header bolts and snap!!!

grade 8 broke?!?!

must have been a bad bolt, anyways i have helo coil stuck in my head with a grade 8.

were gonna have to take off the head and drill out the coils...buy aluminum rod and fill the drilled holes and tap them and make our own threads.......again

that yamaha bike has a direct fit swingarm....i guess this gives us and excuse to take her apart and mod her up.

that swing arm needs painted, the head needs new threads, the plastics need ordered, cut, and painted.

ill get pictures of the broke bolt in a little bit




gotta get the tool to take the broken bolt out....cant remember what its called off top but go to the parts store and ask for broken bolt removers and they'll know

[Supercharged]

easy outs, i have to go to a store called grainers for some aluminum rod to fill the holes after we drill new holes

[Supercharged]

Dude your bike is pissed you put those dice valve stem caps on it that's the problem without a doubt bluelaugh

hah, that made me laugh
bluelaughbluelaughbluelaugh

[Supercharged]

so we thought we were gonna drill them out, fill with weld and make new threads...actually words from the wise gacve us an idea to cut a slit in the helo coil like a screw driver and back out the broken bolt, it worked...got a little nail and sealed her by beating it in.

[Ghost Rider]

You were planning on getting a new body kit right?

Isn't that stabilizer going to hit the fairing?

[Supercharged]

it shouldnt, plus it can always be remounted to be hiddencool_smilie

anything possible when you got a machinist layin arounddunno

[The Nutty Professor]

Were under the bed and what's he eat? I been thinkin' about getting one and naming him Duke moon1

[rene13]

This is how I did mine
YouTube - X-18 dual stabilizers

[Supercharged]

nice, we coulda made it hidden but i dont really care

im more function or looks right now

so i got an oil cooler hooked up, a new badass billet throttle 1.4 turn, i also got a new lever for my clutch also with a new clutch cable...

140 chucks on an oil cooler, oil cooler plate, throttle, clutch cable and a shifter i got for my dudes z50 and bought him a spark plugcowboy

[Supercharged]

Were under the bed and what's he eat? I been thinkin' about getting one and naming him Duke moon1


you mean where?

right under your nose you nut...i swear im going to machinist schooldunno

[Supercharged]

and this is the result of taking your time

[Supercharged]

and some more shizzle

[Supercharged]

yeah :phat:

[rednek01]

Congrats it looks like its really coming together!thumbsup2

[Niusiic[latvia]]

niceeeee bro!!

[Blitz$M.Inc.$]

nice throttle, i recognize those x6 grips

[125ccCrazy]

do you have an HV oil pump??

Why did you mount it there?, the cooler should be mounted so air can flow through it and not past it to work properly.... Just my twocents

[Supercharged]

the lines are a bitch and flip a total of 8 ways, i have a steering stabilzers taking up room not to mention my 2 bros. airfilter

im just goin to drill out my oil pump hole alittle more for the HV

[Supercharged]

nice throttle, i recognize those x6 grips


yea and they suck....their also on cateyestwocents
twocents

[Supercharged]

Congrats it looks like its really coming together!thumbsup2


;24144']niceeeee bro!!

i appreciate the comment but i do owe credit to the people who have helped me out on this POS

thanks to my people, without them and their motivation i would have never built this bike up...thinking_smilie

[125ccCrazy]

the lines are a bitch and flip 8 ways total, i have a steering stabilzers taking up room not to mention my 2 bros. airfilter

im just goin to drill out my oil pump hole alittle more for the HV

that wont increase the pressure though, making the hole bigger with the same pressure can actually decrease pressure

[Supercharged]

is it totally neccessary...ive heard yes and no, ive heard stock is fine and its fine with the oil thats in it now

the system is pressurized so im not saying im right and your wrong

i just figured its a good idea cuase i have a high compresion piston

[125ccCrazy]

is it totally neccessary...ive heard yes and no, ive heard stock is fine and its fine with the oil thats in it now

the system is pressurized so im not saying im right and your wrong

i just figured its a good idea cuase i have a high compresion piston

well from what I've been told running a cooler on a 110 you need the HV pump as the stock one won't flow the oil through the cooler efficiently, just doesnt have the Umph to push it all that way...

[Blitz$M.Inc.$]

and back in the day, they usta give you the proper size drill bit to prep the case for the ho oil pump
i was gonna do mine but when i seen that the clutch pack had to come off, i didnt have the tool so i said f it
you should do it, thats how the motor cools and lubricates
da blood main

[Supercharged]

and back in the day, they usta give you the proper size drill bit to prep the case for the ho oil pump
i was gonna do mine but when i seen that the clutch pack had to come off, i didnt have the tool so i said f it
you should do it, thats how the motor cools and lubricates
da blood main


i thought i did the oil pump from the top of the motor....clutch side has to come off???

i thought i was taking off the piston ect. ect.dunno

oh well not like im not dumping money anyways

[Supercharged]

heres the POS comin up...Nutty-Rant

[Supercharged]

dumb shizz...4 bucks hey i needed a ventdunno

[Blitz$M.Inc.$]

i think the cylinder and piston have to be off too dunno

[Supercharged]

fine, the oil coolers coming off

i ordered a high volume oil pump from TB

i guess you need to go thru the clutch casings

[Supercharged]

heres the videos i promisedthumbsup2
http://s221.photobucket.com/albums/dd99/Superturbos/x18/?action=view&current=064-2.flv

yeah bob knows he looked like an idiot

http://s221.photobucket.com/albums/dd99/Superturbos/x18/?action=view&current=068-1.flv

heres the getting used to the new 1/4 throttle i got, so much power in that little amount of space

http://s221.photobucket.com/albums/dd99/Superturbos/x18/?action=view&current=070.flv

heres the last until some wheeliesdunno

http://s221.photobucket.com/albums/dd99/Superturbos/x18/?action=view&current=071.flv

[Supercharged]

we took the old brake piece that actuates and cut it off, welded it to a old dirtbike lever and took the x18 foot piece and welded it on top of the old dirtbike lever foot piece

[smurfcivic]

shit man looks like that 114 is bring alot to thte atble

[Supercharged]

thats an understatement, this is no longer A toy...the crotch rocket stabilzer is so helpful, the tightening of the rear is better, new tires, new motor, oil cooler bought and oil pump being ordered, new chain, new throttle.

the brake set up is because of the style kickstart i got.

[Niusiic[latvia]]

niceee! Love your bike!

[Blitz$M.Inc.$]

when i first got my 125 i was thinkin 'this aint a toy no mo
its a good feeling
to go from cheap chinese toy, to street rocket
then when i did the dual brakes and the swingarm flip, i started thinkin i had a legit track contender
its one thing to say, i race my(cheap)bike, to, i have a (real)race bike
so...dog...can i get some paint on that muffler?

[Supercharged]

when i first got my 125 i was thinkin 'this aint a toy no mo
its a good feeling
to go from cheap chinese toy, to street rocket
then when i did the dual brakes and the swingarm flip, i started thinkin i had a legit track contender
its one thing to say, i race my(cheap)bike, to, i have a (real)race bike
so...dog...can i get some paint on that muffler?


it is street rocket with good gas mileage, it was awesome because people are hurtin for gas round' here. i guess the cops dont care and dont think twice about my bike, it must look legitdunnodunno

i stop at a stop sign and pull out into the road and over the hill comes a cop with his WOOPS on and lightsspeechless33 thats me!!!!

no he didnt care, he was on his way somewhere else..but i got stopped a total of 4 times since i owned this bike

im just bout to say its all gas mileage while im riding, seriously gas is $$$ and i drive a supercharged car.

i can drive my bike and not spend 2 more dollar for a good 2 days worththinking_smilie

[Supercharged]

just got back from extending my buddys Z50, they cut it before the trees, and slide a thicker pipe inside and cut down the middle of a pipe, wacked it...torched and bent it to the metal under it.

i finally have my kickstand back, back when it was still a POS, my brother came back and i said wheres the kickstand and he did this dunno

yea he found it with no bolts....this was months ontop of months ago

bout to put 2 or so videos up i got bob to take of me suckin assbanghead

[Supercharged]

http://s221.photobucket.com/albums/dd99/Superturbos/x18/?action=view&current=002-2.flv

http://s221.photobucket.com/albums/dd99/Superturbos/x18/?action=view&current=003-2.flv

i have one more and its uploading, ill post it in a bit

[Supercharged]

saved the best for the last, or the shittiest of the shitty

http://s221.photobucket.com/albums/dd99/Superturbos/x18/?action=view&current=001-2.flv

[stuntnx7]

lookn good keep it up and you'll be doin blox in no time

[X7rocks]

sweet bike sounds good man

[Supercharged]

lookn good keep it up and you'll be doin blox in no time


almost went thru the hassle of making a 12 oclock bar but i figured id wait til another good sunday

any suggestions?

[Supercharged]

sweet bike sounds good man

thanks kenny, preciate it

[stuntnx7]

almost went thru the hassle of making a 12 oclock bar but i figured id wait til another good sunday

any suggestions?




my suggestion is wait til you can get close to the tail and have good brake control be4 u start scrapin....if you try to scrape a bar with no brake control you will wreck and tear the bike to shet....when you start coming behind BP and using the brake to bring you back consistently then you should put a bar on....you will know when your at BP (balance point) when your doin blox


now if you really just wanna get one and put it on they have some for fiddys that i think will mount up on ours no problem....it comes with brackets so no welding and also comes with the replaceable peice that makes sparks good


or you can go to tractor supply and buy some 2 in or so wide wide flat steel and weld it straight to the frame but measure twice weld once....i think i bought 2 in wide when i was gonna make one but my welder is broke so i still got it around here somewhere

[Supercharged]

i didnt make it yet, i wanted to make it to where i can put my knee on the seat and slip my foot in between the plastics and the 12 bar

[stuntnx7]

i didnt make it yet, i wanted to make it to where i can put my knee on the seat and slip my foot in between the plastics and the 12 bar




would be cool

[Supercharged]

i think a crash cage is gonna have to be next priority

[r32rider]

man i didnt know that 114 kit would ad that much power. that thing really gets it. what gearing you running.

[Supercharged]

14/28

[Supercharged]

man i didnt know that 114 kit would ad that much power. that thing really gets it. what gearing you running.

btw ill get a top speed run asap

[stuntnx7]

i think a crash cage is gonna have to be next priority



nah i dont think its needed really....i just hold onto mine if i ever loop it but im not really goin fast either when i loop...ive let the side case tap the ground 1 time but only put scratches on it....but yea if you could fabricate one that wouldnt break the motor mounts off or bend them then yea it would be cool


ps...a lil thing that helped me learn rear brake.... i would have the brake rubbing a little bit while moving really slow so i could bring it up to balance point quick and just put more pressure on the brake if i went behind BP....if you go slow its easier to jump off or catch the bike and less risks of gettn hurt....

another thing you can try is lowering the air pressure alot til you can squish the tire with you fingers a little

[Supercharged]

would be, i think its going to look like ass until i paint this whole bike


god dam why does it get more and more $$$